STORM BOXX™ TRACE™ Edge
CONTOUR TO THE PAVEMENT
When a big storm hits, you can rely on the FISHER® STORM BOXX™ fixed wing pusher plow as your go-to solution for clearing massive amounts of snow to the pavement. Equipped with TRACE™ edge technology that contours its individual 2’ cutting edge sections to the pavement, it removes more snow, so you can save time and reduce salt usage. It’s simple, fixed-wing design is built for one thing: an efficient snow-clearing pass, every single time.
Compatible with Skid-Steers, Tractors & Wheel Loaders
Compatible with Skid-Steers, Tractors & Wheel Loaders
Features:
• TRACE Edge Technology: The terrain-response advanced cutting edge is comprised of independent, 2' sections that raise, oscillate, and trip to accommodate contours and obstacles in the plowable surface. Working together, the sections remove more snow, reducing the amount of salt required. Two greasing locations allow the operator to keep the components well lubricated for maximum performance.
• Common Attachment Plates: A common attachment plate and floating coupler makes installation easy with a wide variety of equipment and machinery, including skid-steers, wheel loaders, backhoes, and tractors. The floating coupler reduces negative down pressure from the vehicle, protecting against premature wear of the pusher cutting edge and components.
• Easy Operation: Operation of the STORM BOXX plow is conveniently tied into the equipment’s controls. Simply raise and lower the lift arm and angle the attachment plate to position the pusher in the correct orientation.
• Self-leveling Side Plates With Reversible, Bolt-on Skis: The side plates ensure the TRACE edge remains in direct contact with the plowable surface. The reversible, bolt-on ski makes serviceability easy, allowing you to use both edges of the ski before replacing. The bolt-on design makes replacement in the field possible with a ¾” socket, ratchet, and 3/4" wrench.
• ¾" Cutting Edge With Carbide Inserts: The STORM BOXX plow performs in the most grueling commercial conditions. Each 2' section comes standard with a ¾" cutting edge with carbide insert. Each section uses the same cutting edge for easy replacement when necessary so you can replace only the sections that show wear.
• Common Attachment Plates: A common attachment plate and floating coupler makes installation easy with a wide variety of equipment and machinery, including skid-steers, wheel loaders, backhoes, and tractors. The floating coupler reduces negative down pressure from the vehicle, protecting against premature wear of the pusher cutting edge and components.
• Easy Operation: Operation of the STORM BOXX plow is conveniently tied into the equipment’s controls. Simply raise and lower the lift arm and angle the attachment plate to position the pusher in the correct orientation.
• Self-leveling Side Plates With Reversible, Bolt-on Skis: The side plates ensure the TRACE edge remains in direct contact with the plowable surface. The reversible, bolt-on ski makes serviceability easy, allowing you to use both edges of the ski before replacing. The bolt-on design makes replacement in the field possible with a ¾” socket, ratchet, and 3/4" wrench.
• ¾" Cutting Edge With Carbide Inserts: The STORM BOXX plow performs in the most grueling commercial conditions. Each 2' section comes standard with a ¾" cutting edge with carbide insert. Each section uses the same cutting edge for easy replacement when necessary so you can replace only the sections that show wear.
